El Banco de pruebas para motores CA/CC de HV Hipot Electric Co., Ltd. puede ayudar a muchos técnicos eléctricos a realizar diversas pruebas eléctricas de forma más cómoda.
Cómo probar un motor de corriente alterna (solo texto):
2. Prueba de aislamiento (megóhmetro):
Winding-to-ground: >1MΩ (for 380V motor)Phase-to-phase: >1MΩ between any two windings>0.5MΩ in humid environments3. Prueba de devanado (multímetro):
3-phase balance: Resistance difference <2% across windingsSingle-phase: Main/auxiliary winding resistance should match specs4. Prueba en vacío (con alimentación):
Start at rated voltageMeasure phase currents: No-load current ≈ 20%-50% of rated currentListen for noise: Uniform hum (abnormal: screeching/irregular sounds)Check temperature: After 30 mins, case temperature rise <70℃5. Prueba de carga (crítica):
Gradually increase to rated loadMonitor:Phase current balance (deviation <10%)Speed fluctuation <5%Bearing temperature <95℃Abnormal vibration6. Comprobaciones especiales:
Capacitor test (single-phase): Capacitance degradation <10% of ratingRotation direction: Confirm matches requirements