How to protect the dry-type test transformer?
1. Gas protection Gas protection refers to a protection that causes the protected transformer to...
Technical Guide
The problem of using DC high voltage generator
The use of DC high voltage generator provides convenience for production and processing, but in...
Test method of partial discharge test
The partial discharge test is a non-destructive test item, and there are currently two types...
Causes of three-phase imbalance in resistance
The resistance in the DC resistance tester is unbalanced or the measured value is too...
What is a gas-filled test transformer?
Electric workers often need to boost high-voltage power equipment at work, so they need to...
Grounding resistance tester operation problems
Answers to the operation problems of the ground resistance tester 1. Why is the resistance...
Method of measuring transformer DC resistance
Method of measuring transformer DC resistance (1) Electric bridge method. Two types of bridges are...
Ground resistance tester measurement steps
Grounding resistance tester measurement steps: 1) Insert the two grounding probes into the ground 20m...
Operation and use of relay protection tester
1. Wiring instructions The yellow, green, red and black terminals on the panel of the...
Why does the DC resistance tester make a noise?
The DC resistance tester will produce a continuous “hum” sound when it is running. If...